NAT. NYLON 1.75mm
NAT. NYLON 1.75mm
3D Printer Filament
Weight: 1kg
Colour: Natural
Material: Nylon
Nozzle Temp: 230°C - 260°C*
Full metal hot-end required for temperatures above 240°C
Bed Temp: 60°C - 100°C
Diameter: 1.75mm ± 0.04mm
*Not all 3D printers are the same. This makes giving temperature advice extremely difficult. Consider the suggested printing temperature as a starting point to be fine tuned as you experiment and print with our material. Don't be afraid to go above or below our suggested temperatures if it results in better quality prints.
PRINTING PARAMETERS
Print Speed: 20 - 100 mm/s
Printing Temperature: 230 - 260°C
Build Bed Temperature: 60 - 100°C
Retraction Speed: 30 - 50 mm/s
Retraction Distance: 3 - 8 mm
Cooling Fan: No
Filament Type: Nylon
Printer Type: Cartesian/Delta
Extruder Type: Direct Drive/Bowden Tube
Layer Height: 0.2 - 0.4 mm
Fill Density: 0 - 100%
Shell Thickness: >0.4mm
When you are in edit mode or signed in to Squarespace, you cannot see any Wiremo changes.
However, if you open a tab in Incognito mode, or in a separate browser that you are not signed in to your site with, you should be able to see your reviews.