WHT. HIPS 2.85mm - ECO
WHT. HIPS 2.85mm - ECO
3D Printer Filament
Natural HIPS 2.85mm 1kg
Weight: 1kg
Colour: Natural
Material: HIPS
Nozzle Temperature: 220°C - 240°C
Bed Temperature: 50°C - 80°C
Diameter: 2.85mm ± 0.03mm
* Not all 3D printers are the same. This makes giving temperature advice extremely difficult. Consider the suggested printing temperature as a starting point to be fine tuned as you experiment and print with our material. Don't be afraid to go above or below our suggested temperatures if it results in better quality prints.
PRINTING PARAMETERS
Print Speed: 20 - 80 mm/s
Printing Temperature: 220 - 240°C
Build Bed Temperature: 50 - 80°C
Retraction Speed: 30 - 50 mm/s
Retraction Distance: 3 - 10mm
Cooling Fan: No
Filament Type: HIPS
Printer Type: Cartesian/Delta
Extruder Type: Direct Drive/Bowden Tube
Layer Height: 0.1 - 0.3mm
Fill Density: 0 - 100%
Shell Thickness: >0.6mm
When you are in edit mode or signed in to Squarespace, you cannot see any Wiremo changes.
However, if you open a tab in Incognito mode, or in a separate browser that you are not signed in to your site with, you should be able to see your reviews.